I don’t normally like carrying too many accessories for my photography because they can be a bit of a double edged sword. On one hand they help you do things that wouldn’t otherwise be possible but on the other they add size, weight and can hinder your work. There are some accessories however that I do consider essential for the LX5:
- Screen protector – I don’t think this one takes much explaining other than to say the rear screen can scratch easily. I use a 3 inch thin plastic screen protector that was made for a mobile phone as they are cheap and do a great job.
- JJC lens cap – Where the LX5 lens meets the camera body there is a threaded ring. Unscrew this ring and you can screw on the JJC replacement lens cap. The lens cap is never removed but as you switch on the camera the lens extends through the lens cap which splits into three. When the lens retracts the lens cap closes to cover it again. This has protected my lens on countless occasions and also reduces lens cleaning. This is a great accessory for street photography.
- Filter Tube – In the previous point I explained how the filter cap could screw to the lens of the camera. The filter tube follows the same approach and screws to the camera with the lens extending inside the tube. The other end of the tube is threaded and can accept a filter ring to which you can then attach filters. For Landscape Photography the ability to attach an filters such as an ND Graduate is essential. The only downside is that you can only attach either the lens cap or the filter tube but not both together.
- My final accessory is really optional and is noise reduction software. If you are keeping below ISO400 with the LX5 and not printing larger than A3, you probably don’t need this but as the ISO creeps up it can become essential. Even if you use only low ISO settings you may be a bit of a perfectionist as I am (I often clean images even from my 5D MkII to remove noise because I am that fussy). I actually use 2 software packages for noise reduction at present, Nik Dfine and Topaz DeNoise. DeNoise is probably the best to my mind but you might have your own preference.
On a final point of interest, many photographers would consider the LX5 to be an accessory for their main camera. If you are one of these people think again and try a day out with just the LX5 and a couple of accessories.
Over the course of a year I am asked to give quite a few presentations to camera clubs here in the UK. These presentations cover a variety of topics rather than just being about Lightweight Photography, but I do often make reference to my use of compact cameras. I also like to take along A3 prints I have made, including those from my LX5 compact camera, so people can view them at the break.
The first thing I like to try is for people to pick out the LX5 prints from those made on my 5D MkII. People sometimes guess which one but there is virtually no one who selects the correct print with a rationale such as the quality isn’t as good. My challenge then is to ask how many people print larger than A3+ and very few say they need to do so. Of those that only print up to A3+, I like to ask “how many spend lots of money on expensive lenses and SLR bodies in order to produce images that they can’t distinguish from those shot on a compact camera costing a few hundred pounds”. Killer question eh?
All sorts of justifications now start to come out as to why they can’t possibly use a compact camera. One of the most frequent and one that is regularly raised as a question is that you can’t use filters with a compact camera because there is no filter ring to attach the filter folder to. In fact I also hear this when I am out with my camera; people come over to me to ask how on earth I have attached a filter.
The truth is that many of the high end compact cameras do allow for a filter attachment but people don’t realise it. Often there is a plastic ring around the base of the lens that can be unscrewed. It’s then possible to attach a tube to the thread which also has a thread at the other end to which you can attach a filter ring and holder. The cost of this little accessory is around £10 and they can be purchased from eBay for all sorts of cameras. As I say, I use mine with an LX5 but my friend has a Canon G12 and can do the same. He also came across someone with a Canon G9 who found he could attach the filter holder. Another acquaintance had a Canon S95 which also used this solution. In fact, it’s probably a good bet that if your compact camera can shoot RAW files that it will also have some sort of mechanism for attaching filters.
So don’t make this assumption and reject compact cameras from your photography. And if you know your camera does have a way to attach filters, why not leave a comment here to share this with others.