If you have been following this blog of late you will have no doubt read about my possible switch to the Fuji XT1 and the problems I have encountered. The problems became evident after I shot my first few images and noticed the camera wouldn’t resolve grass very well at all, rendering areas which should contain fine detail as a green mush.
Many of you made some valuable suggestions for which I am very grateful. Apparently this is quite a common problem and relates to the RAW converter not being able to translate the data from the XTrans sensor very well. Some of you agreed there is a problem whilst others haven’t noticed an issue. I have three points to make on this before we start to look at the RAW converters.
- There appears to be variation between cameras judging from some of the RAW files people have shared.
- There is variation between lenses used. I have two lenses, an 18-135 and a 10-24. At the common end of the focal lengths (18-24mm) the 10-24 lens performs much better than the 18-135. I have also noticed that the 18-135 lens is softer and less able to resolve detail across the focal range. That’s no great surprise but it seems to exaggerate the issue.
- If you’re a Mac user, you might be interested to know that you probably don’t notice the issue. But before you get excited, I believe the issue is being masked to some extent by the brilliant retina display. I suspect the pixel density is hiding the effect as I can process an image on the Mac and it looks great at 100% but move the resulting file to my Windows PC and it’s not good.
With these points in mind, let’s take a look at how we will evaluate the available RAW converters.
RAW converters are really quite personal tools. What one photographer likes will drive another crazy. Some will see fault where others will see perfection. What some may see as essential others will see as a waste of time. So here are my categories for evaluation and they are in the order of importance I place on the feature:
- Ability to render fine detail in the converted image.
- Natural colour rendition and the ability to control colours.
- Control over sharpening and noise reduction.
- Support for lens profiles and automatic lens correction.
- Support for colour profiles.
Some functions such as exposure, saturation, contrast, shadow and highlight controls are a given. If the converter doesn’t provide these then it shouldn’t be on the market to my mind.
In the next blog post I will look at how some of the available converters fair in my assessment.
Oh, I almost forgot to mention, the 18-135 lens is going back. I should have known there was a problem with it when some of the early test shots produced images such as the one below. Just because the issue seemed to right itself doesn’t mean it’s entirely fixed.