I recently bought another camera (used) and whilst I will have more to say on that in the future, one thing it made me realise was just how good the Micro 43 lenses are. But this isn’t the case for all of the Micro 43 lenses; there are some really poor ones out there. When these lenses are good they are really good. The corners are sharp and show little distortion and you can use them wide open without worry. But when they are poor, they can make you question your decision to invest in the Micro 43 system. With this in mind I thought I would share some of my experiences and hopefully others of you will share yours.
I will point out that this is not a scientific lens review but what I think are the important points having used the lenses discussed. You also need to be aware that being a Landscape Photographer I like to achieve a good depth of field, very sharp images and well defined details. Depending on your photography interests you may have different needs.
Now both Panasonic and Olympus produce some excellent lenses (as well as some poor ones) but they take very different approaches to image stabilisation. Olympus builds stabilisation into their camera bodies whilst Panasonic build it into the lens (but not every lens). This means that if you have an Olympus body you can use any lens and still benefit from stabilisation. If you have a Panasonic body then you will only benefit from image stabilisation when you use a Panasonic lens (and only then if it is stabilised as not all lenses are).
Now you can mount a Panasonic lens on an Olympus body without any problems; this is one of the prime features of Micro 43 – it’s a standard. For example, I frequently use a Panasonic 14-45mm lens with stabilisation on my Olympus EM5. I do take care to turn off the lens stabilisation using a switch on the lens barrel. But even when I forget it seldom causes an issue. With other lenses such as the Panasonic 45-150 the lens is stabilised but there is no stabilisation switch on the body. Despite this I have never experienced a problem mounting these lenses on my Olympus EM5 and leave the stabilisation for the camera on all the time.
In short, don’t worry about mixing lenses and camera bodies from Olympus and Panasonic although you might need to give a little thought to manually switching it off for some combinations of lens and camera body.
Next time we will start to review some of the zoom lenses I have used. But before we go I will leave you with a few section of the above image zoomed to 100% magnification. This shows just how good the Micro 43 system can be.