The other night I received a number of emails that reminded me how people involved in Landscape Photographers are failing to move with the times. It used to be that you would start photography using a 35mm film camera and in time, if you were interested in Landscape Photography you might move up to a Medium Format camera. Finally, if you were taking your Landscape Photography seriously and ultimately wanted to turn pro, you would use a large format camera which gave a number of benefits such as image size and camera movement. In truth for many, the camera movement was mainly necessary in order to get proper depth of field and stopping down the lens to a small aperture e.g. f/64 just wasn’t sufficient.
What prompted me to think about this last night were a number of emails I received showing relative newcomers to Photography posing next to their new large format cameras. This caused me to wonder if they had a specific reason to migrate to the large format camera or if they were just following the well trodden path of landscape photographers in the past.
In the past, large format equipment meant exceptional image quality and detail together with huge depth of field; all the things the landscape photographer needed. It still does equate to these things however there are other routes to achieving great landscape results. I can show you images that I have shot with my GX1 using a 28mm lens set to f/7.1 where the rocks at my feet are sharp and detailed, as are the distant hills. This is one of the advantages that having such a small sensor brings; incredible depth of field even at quite wide apertures.
As for the question of detail and resolution, I can upscale my prints to 30 inches and it’s got just as much visible detail as the file printed at the native size. Why, because the printer is the limiting factor. If I can see the barbs on a barbed wire fences when I view the image at 100% on screen, then I might need to print the image at double its current resolution or more before I can see the same barbs in the print. The limitation is therefore the quality and resolving power of the lens and the ability of the printer to print the detail.
I should stress that there is nothing wrong with large format cameras and that a micro 4/3 camera can’t compete with the image resolution from a large format camera, but do you really need all that extra cost, weight and time investment if you don’t print larger than say A3+?
I will however admit however that it doesn’t look quite the same when I am posing for a promotional shot with a tiny GX1 as opposed to a large format camera.